Bolts, Fittings & Hardware
- 1
- 2
-
Only 4 left in stock -
Only 4 left in stock -
Only 3 left in stock -
Only 4 left in stock -
Only 1 left in stock -
Only 2 left in stock -
Only 2 left in stock -
Only 2 left in stockOIL SYSTEM FITTINGS & CLAMPS
Fittings, Hose Barbs, Swivels, Bushings, Clamps...Everything you’ll need to plumb
your oil system.1/2" Female Swivel x 1/2" Hose Barb, Pack of 2
Converts #8AN Male to 1/2" Hose Barb -
Only 4 left in stockComplete Engine Mounting Bolt Set used to mount VW Type 1 Engine to Transmission.
(71-on) or late case using Dog House Type Cooler
-
QUICK RELEASE FASTENERS
These are the fasteners that are used to hold supersonic airplanes and bullet trains
together. Designed for quick removal and replacement of panels and body parts.
(Buttons are for 5/8" installed height).Button Stud, Short Non-Ejecting
13/32" x .550" Grip, Each -
Only 6 left in stock -
Only 5 left in stock -
Master Cylinder Bolt Kit
Berrien Nostalgia/Genesis Master Cylinder Installation Bolt Kit
-
Nostalgia Dune Buggy Body Bolt Kit
Used to bolt the Nostalgia Dune Buggy Body to a Berrien Nostalgia Dune Buggy Chassis.
(20) Bolts, (40) Washers, (20) Lock Washers and (20) Nuts.
-
-
Steering Bolt Clamp Kit
Bolts to bolt steering box clamp to steering box.
-
Only 2 left in stockSpring Plate Bolts
Replace those rustly bolts with new Stainless Steel Cap Head Bolts.
Allen head design makes it easier to tighten the spring plate cap.
Works on S/A and IRS.Kit contains (4) Stainless Steel Cap Head Bolts used to mount (1) Spring Plate.
-
-
-
Only 5 left in stock -
-
-
Oil Pump Bolt
Metric socket button head used when Crankshaft Pulley hits the oil pump bolt.
When using a thicker oil pump or oil pump/filter combination with an aftermarket
crankshaft pulley the pulley will rub the original oil pump bolts.
These socket button head bolts solves the problem.Oil Pump Bolt - Metric socket button head, Class 12.9 steel black oxide finish, 8mm -
-
12mm Rear Shock Bolt Kit
12mm Shock Bolt, Washer and Nut Kit for IRS or S/A rear suspensions.
Requires two per shock.
Sold Each.
-
Genesis Dune Buggy Body Bolt Kit
Used to bolt the Genesis Dune Buggy Body to a Berrien Genesis Dune Buggy Chassis.
(20) Bolts, (40) Washers, (20) Lock Washers and (20) Nuts.
-
Only 6 left in stockOil Sump Acorn Nuts
Fits oil sump plate studs M6-1.0 Capnut
-
Only 3 left in stockOil Pump Bolts
When installing an aftermarket oil pump or oil pump/filter combination along with an aftermarket cranshaft pulley the oil pump bolts can hit the back of the crankshaft pulley.
These metric socket button head bolts helps to solve this problem.
Metric socket button head (4)
-
Only 10 left in stockBrass Fittings
- 1/2" Hose ID x 1/4" Male NPT Brass Barb Fitting
- 150 PSI maximum working pressure, -40° to 160° Temperature Rating
- PLEASE NOTE, 1/4" NPT MEASURES 0.540" OUTSIDE THREAD DIAMETER IN LINEAR INCHES
- NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER
1/2" Hose Barb ID to 1/4" Male NPT Brass Fitting
-
Hose Clamps
No tools required! Use the convenient E-Z key to tighten the hose clamp by hand. Ideal for all tight space applications. Remove the E-Z key after tightening for a tamper-resistant connection and seal. E-Z key hose clamps can be removed and reused. Includes stainless steel band and housing, plated screw and plastic E-Z key.
Fits Dune Buggy Fuel Hose and other hose applications
2 EZ Clamps SAE Size 36
Hose Clamp 1 3/4" - 2 3/4", EZ Tighting Type (pr) -
Only 5 left in stockEngine Studs
This stud has a non-threaded area in the middle. These studs are used in a variety of locations including intake studs, exhaust studs, oil pumps, fuel pumps, etc.
M8-1.25 x 38mm Double End Stud
-
Cylinder Head Hex Nut, 8mm
-
Steering Coupling Bolts
Steering Coupling Bolt kit (5) Bolts (5) Nylon Nut
-
Seat Slider Bolt
M8 x 50mm Slider Seat Track Bolt
-
Seat Slider Bolt
M8x40mm Slider Seat Track Bolt
-
Only 9 left in stockWindshield Wiper Shaft Mounting Hardware
Standard Bug 70-77, Super Beetle 71-79 & Bus 68-79 (2 nuts/flat washers,1 spring washer).
2 Sets per CarWindshield Wiper Shaft Mounting Hardware (5pc Set) for one shaft
-
Transmission Socket Head Bolt
Have you ever had a problem installing or removing the transmission bolt under the clutch arm...well know as "The 4th Bolt"?
Then you know how frustrating that can be and why people cuss and sometimes just leave that bolt out.
Well here is the solution, a socket head bolt that goes in easily and goes out just as easy.
Uses a 8mm allen wrench or socket drive allen.Transmission Mounting Bolt
-
Clutch & Brake Pedal Stop
Clutch & Brake Pedal Stop for stock VW-style pedals used on VW or Berrien Chassis.
Clutch & Brake Pedal Stop
-
Only 1 left in stockFastener Tab with Spring
These are the fasteners that are used to hold supersonic airplanes and bullet trains together. Designed for quick removal and replacement of panels and body parts. (Buttons are for 5/8" installed height).
Fastener Tab with Spring 20pc
-
12mm Front L/P Shock Bolt Kit
12mm Shock Top Bolt, Washer and Bottom Nut Kit for L/P front suspensions.
Requires one per shock.
Sold Each.
- 1
- 2
